|
Our goal it to best supplier of automotive glass for our customers. To achieve this goal we have our glass cut by a company that specializes in water jet cutting which is the most accurate technology in the industry.
|
Cutting Custom Car Glass for Your Vehicle
Glass, like almost anything in the automotive industry, is best when cut and finished by machines. This is for any type of car - classic car glass, hot rod glass, and antique glass. No O.E.M. (Original Equipment Manufacturer) windows for cars built after 1928 have been handcrafted in the automotive industry which includes vintage car glass installation. Automotive glass has to be uniform to fit properly and for optimal strength.
|
Waterjet Cutting Machines are the most accurate way to cut glass.
This type of machinery has been used for many years to produce household and commercial windows. It has also been used for advanced machining processes involving stone, metals and ceramics. Until recently, this type of equipment has been out of reach for companies like ours.
|
Why you should care about the benefits of water jet cutting:
There are really only three virtues that a glass company needs to practice to produce a superior quality window: accurate shape cutting, careful handling and consistent edgework.
Shape cutting
A CNC water jet is used to cut the basic shape. This machine is accurate to ⊥ 0.0001 inches...600 times more accurate than handcrafting! Once the shape is in the computer and verified 100% accurate to the original pattern, all of the windows cut using that pattern from then on will be identical to each other. That's not possible using traditional, handcrafting techniques.
The traditional technique of using heat and chemicals to separate the waste while cutting the shape produces stresses that accelerate de-lamination. De-lamination occurs when the bond between the glass layers and the laminate loosen, causing them to separate. This allows water and other contaminates to seep between the glass layers, destroying the window. Water jets cut with a mixture of high-pressure water and abrasive garnet...eliminating the need for chemicals and heat. This helps preserve the bond between the glass layers and laminate, and eliminates any chance of contributing to the destructive process of de-lamination.
Handling
Traditional methods of cutting, shaping, and edging auto glass require constant handling. This almost guarantees that the glass will at one point be dropped, chipped or scratched. Water jet cutting eliminates almost 90% of the handling...from raw glass to finished product. Less handling means fewer mistakes, fewer scratches...and a much better product.
Edgework
The traditional glass cutting process requires that the window be ground to its final shape and the edge "seamed" on a water-cooled belt grinder. After the seaming process, the edge is gradually worked using progressively finer belts until the desired shape and finish is achieved. This long, laborious process often produces chips, undercuts, scratches and an inconsistent shape. With a water jet, the window comes off the cutting bed perfectly seamed and ready for final edgework.
Instead of a belt grinder, we use a shape edger that quickly machines an even, consistent pencil edge with no stress to the glass or to the operator. Multiple passes quickly refine the edge and prepare it for polishing. Using the shape edger produces a superior looking edge in a fraction of the time it takes to produce a "good" edge by traditional methods. This means that we can produce a better looking, more consistent product for your car much faster than our competition.
| 
